Brick and Segmental Paving

Download this scope of work – Brick and Segmental Paving (PDF)

Scope of work

  • Lay segmental or unit paving, including surface preparation
  • Concrete work for brick and segmental paving
  • Incidental work of another class.

Qualifications required

Any one of the following:

  • successful completion of any of the following courses:

    • an apprenticeship in bricklaying and blocklaying

    • Certificate III in Bricklaying/Blocklaying CPC30111

    • Certificate III in Paving CPC31611

  • successful completion of a course the commission considers is at least equivalent to one of the courses above

  • a recognition certificate as a qualified bricklayer and blocklayer

  • a qualification or statement of attainment of required competency for the class of licence including the following units of competency, or units of competency the commission considers are at least equivalent to the following units of competency:

    • CPCCCM1014A – Conduct workplace communication

    • CPCCCM1012A – Work effectively and sustainably in the construction industry

    • CPCCOHS2001A – Apply OHS requirements, policies and procedures in the construction industry

    • CPCCCM1013A – Plan and organise work

    • CPCCCM2001A – Read and interpret plans and specifications

    • CPCCCM1015A – Carry out measurements and calculations

    • CPCCCM2005B – Use construction tools and equipment

    • CPCCBL2002A – Use bricklaying and blocklaying tools and equipment

    • CPCCCO2012A – Use concreting tools and equipment

    • CPCCCM2008B – Erect and dismantle restricted height scaffolding

    • CPCCCM2006B – Apply basic levelling procedures

    • CPCCCO2013A – Carry out concreting to simple forms

    • CPCCCM2004A – Handle construction materials

    • CPCCBL2001A – Handle and prepare bricklaying and blocklaying materials

    • CPCCCO2011A – Handle concreting materials

    • CPCCCM2009A – Carry out basic demolition

    • CPCCSF2004A – Place and fix reinforcement materials

    • CPCCCA2003A – Erect and dismantle formwork to footings and slabs on ground

    • CPCCCO2014A – Carry out concrete work

    • CPCCCA3002A – Carry out setting out

    • CPCCBL3001A – Lay paving.

Managerial course

Completion of the approved managerial course.

Financial requirements

The relevant financial requirements in the board’s policies.

Licence grades

You can apply for this licence class as a:

Important note:

  • Interstate Applicants – may be eligible to obtain a licence through mutual recognition

  • Overseas Applicants – may have to have an overseas qualification assessed for equivalency prior to applying.

Registered Training Organisations (RTOs)

Registered Training Organisations issue formal qualifications to people who successfully complete training. Please note that the RTO list is a guide only and subject to change. We strive to ensure that the information contained is accurate and up-to-date. Other qualifications can be:

  • apprenticeship papers

  • documentation showing you successfully completed the appropriate course for this licence class

  • documentation showing you successfully completed an equivalent course for this licence class (e.g. similar modules)

  • recognition certificate

  • a qualification of statement of attainment of the required competency issued by an approved authority for the licence class.

Recognition of prior learning

If you do not hold a formal technical qualification you may be able to obtain it through recognition of prior learning (RPL) through a Registered Training Organisation (RTO). The following RTOs may be able to provide RPL services for this licence class.

Assessment Technique S/T Construction Technique
Address: 
PO Box 5517, Stafford Heights QLD 4053 1187 Gympie Road, Aspley QLD 4034
Phone: 
1300 665 517
Fax: 
07 3263 2877
Email: 
andrew@stct.com.au
Contact: 
Andrew Kelly and Simon Kelly
Notes: 

Servicing Brisbane, Gold Coast, Sunshine Coast, Toowoomba, Maryborough, Rockhampton, Mackay, Townsville and Cairns

Gimbal Construction
Address: 
Unit 1/ 2-6 Breakwater Road Robina, Qld 4226
Phone: 
1300 446 225
Fax: 
07 5564 7025
Email: 
hello@gimbalgroup.com.au
Contact: 
Notes: 

Online, distance, one-on-one, tutorial support and mentoring.

TAFE Queensland - Gold Coast
Address: 
Campuses located at Ashmore, Coolangatta, Coomera and Southport
Phone: 
07 5581 8797
Email: 
gold.coast@tafe.qld.edu.au
TAFE Queensland - North
Address: 
PMB 1, Townsville Qld 4810
Phone: 
07 4750 5451
Email: 
RPL.North@tafe.qld.edu.au
TAFE Queensland - SkillsTech
Address: 
Campuses at Acacia Ridge, Alexandra Hills, Bracken Ridge, Eagle Farm
Phone: 
1800 654 447
Email: 
SkillsTech.Recognition@tafe.qld.edu.au
TAFE Queensland - South West
Address: 
Campuses at Bundamba, Toowoomba, Chinchilla, Dalby, Inala, Kingaroy, Nurenderi, Roma, Springfield and Warwick
Phone: 
1300 914 754
Email: 
southwest@tafe.qld.edu.au